+86-13926505109
mary@omnicycling.com
- Contact Us
-
Omni Intelligent Technology Co., Ltd.
Tel:（+86）755-89208216
Fax: (+86)755-89208219
Add: Floor 11,building 31,Phase 3,Lianchuang Tech Park,No.21 Bulan Road, Longgang District, Shenzhen, P.R.China.
If you have any question,Please contact us,we will give you the best service! Contact Now
- Hot Product
- Certifications
-
- Subscribe
-
Get email updates on new products
Super Cool LED Bicycle Wheel Light
- • Brand Name：Omni
- • Model Number：D020P
- • Size: 500*30*20MM
- • Material: PC+ABS tansparent long-lived
- • Battery: Rechargeable Li-ion Battery
- • Cycling speed needed: Above 15km/h
- • Patterns: 21 patterns change automatic
- • Certification: CE FCC Rohs
USB rechargeable programmable bicycle wheel light
Get 100% Brighter & Safe Bicycle Spokes & Rims!
Production Introduction of the smart bicycle light
★ 64pcs ultra-bright 5050 RGB led form two light bar.
★ PC+ABS tansparent long-lived material.
★ Size of the light bar is 500*30*20MM with weight is 260g.
★ Two ends of the light bar fixed on spoke with clip and screws easy installation and quick release.
★ Cycling speed needed only above 15km/hour can show complete picture
★ User can program or import total 21 kinds of colorful picture or words into the light with software download from our web, picture format can be JPG, PNG, BMP.
★ Provided DIY Software can be worked under WINDOWS7 XP , operation is easy and simple.
★ Prism reflection technology achieved 64 led work out 128 led same flash effect, pictures can be displayed on both side of cycle.
★ Work with rechargeable Lithium - ion 950 mAH battery, can be worked continuously above 8-10hours, just pull of the battery with USB plug from box for charging by PC or mobile charger.
★ Manual and intelligent induction button control light to work on or off automatically to save battery when wheels stop.
★ Water-proof level is IPX6, working normally in rainy day.
★ PC+ABS tansparent long-lived material.
★ Size of the light bar is 500*30*20MM with weight is 260g.
★ Two ends of the light bar fixed on spoke with clip and screws easy installation and quick release.
★ Cycling speed needed only above 15km/hour can show complete picture
★ User can program or import total 21 kinds of colorful picture or words into the light with software download from our web, picture format can be JPG, PNG, BMP.
★ Provided DIY Software can be worked under WINDOWS7 XP , operation is easy and simple.
★ Prism reflection technology achieved 64 led work out 128 led same flash effect, pictures can be displayed on both side of cycle.
★ Work with rechargeable Lithium - ion 950 mAH battery, can be worked continuously above 8-10hours, just pull of the battery with USB plug from box for charging by PC or mobile charger.
★ Manual and intelligent induction button control light to work on or off automatically to save battery when wheels stop.
★ Water-proof level is IPX6, working normally in rainy day.
1.Waterproof design
2.DIY any pattern or word, for example company logo
3.Rechargeable for recycle use
2.DIY any pattern or word, for example company logo
3.Rechargeable for recycle use
1. Fix battery box on hub by nylon cable tie (figure 1)
2. Pull tight the tie and cut off the extra part.(figure 2)
3. Put the light bar upper the hub ,making the center grooves of the light bar corresponding the convex grooves of the hub , fixing the two plastic clamps on light bar .(figure 3). Proper steps are screws- fix clamps-spoke-nut ,then tightened srews.
4. Adjust the two clamps,pls note the clamp wing should be parallel mounted on spoke , so that will ensure the light not swing when riding.(figure 4)
5. Fix the magnate sensor on fork tightly for font wheel,while fix it on chain stay for rear wheel, ensure the direction of magnate sensor facing to the black sensor on the light bar, the distance of two sensors should be no more than 10mm, otherwise the light can not work normally . . .(figure 5)
2. Pull tight the tie and cut off the extra part.(figure 2)
3. Put the light bar upper the hub ,making the center grooves of the light bar corresponding the convex grooves of the hub , fixing the two plastic clamps on light bar .(figure 3). Proper steps are screws- fix clamps-spoke-nut ,then tightened srews.
4. Adjust the two clamps,pls note the clamp wing should be parallel mounted on spoke , so that will ensure the light not swing when riding.(figure 4)
5. Fix the magnate sensor on fork tightly for font wheel,while fix it on chain stay for rear wheel, ensure the direction of magnate sensor facing to the black sensor on the light bar, the distance of two sensors should be no more than 10mm, otherwise the light can not work normally . . .(figure 5)
Tag:
Bike Light
,Smart Bike Light
Shenzhen Omni Intelligent Technology Co., Ltd
Tel:+86-13926505109
Wechat:MaryLai-Omni
Contact Person:Mary Lai
PDF Show:PDF